35kV 套管插头(35-LBI200)
订货号: 35-LBI200
CHARDON套管插头可以与标准的200A 套管井配合组装，另一端则通常与肘型端头配合使用；电流路径使用全铜设计，提供了可靠及稳定的载流能力表现。 CHARDON套管插头设计符合IEEE 386规范的要求，可与其他符合386规范的产品组装使用；本产品内部有六角孔设计，用户可使用六角板手组装，产品有黄色指示环设计，组装时用户可确认组装是否确实完成。
Download resources
订货号: 35-LBI200
CHARDON套管插头可以与标准的200A 套管井配合组装，另一端则通常与肘型端头配合使用；电流路径使用全铜设计，提供了可靠及稳定的载流能力表现。 CHARDON套管插头设计符合IEEE 386规范的要求，可与其他符合386规范的产品组装使用；本产品内部有六角孔设计，用户可使用六角板手组装，产品有黄色指示环设计，组装时用户可确认组装是否确实完成。
Download resources
Input your cable specs below to instantly generate the exact Chardon part number for your Purchase Order.
Quickly estimate your diameter over insulation based on our global market database.
Value copied to the Selector automatically!
The conductor cross-section (e.g., 95 mm²) is standardized and almost always printed on the cable jacket or listed in datasheets. However, cables with the exact same conductor can have vastly different Insulation Outer Diameters depending on their voltage class and the manufacturer's design.
While some catalogs provide the nominal Insulation O.D., manufacturing tolerances mean the real diameter can differ. That is why verifying the exact dimension using an appropriate tool, such as a caliper, is highly recommended before specifying your medium voltage accessory.
The accessory body (adapter or cold shrink) stretches over the insulation. A precise interference fit is critical to eliminate air gaps and control the electric field.
Requires exact Insulation O.D. (mm)
The internal connector (compression or shear-bolt) must perfectly match the core to safely carry the electrical current without overheating.
Requires exact Conductor Size (mm²)